Repeat48WDM-12 offers electrical to optical, optical to electrical or optical to optical conversion. It features 12 video channels combined over build-in CWDM module. All channels are transported to another location with single duplex fibre.
All BroaMan products comply with SMPTE standards, therefore can be used with 3rd party equipment.
Two Repeat48WDM can be used as a point to point pair with 2 fibres in between. It also connects with a Route66 device to offer additional I/O in remote location.
KEY FACTS:
Video ports
Optical Connection Complies with 21 CFR 1040.10 and 1040.11
Repeat48WDM-24 offers electrical to optical, optical to electrical or optical to optical conversion. It features 24 video channels combined over build-in CWDM module. All channels are transported to another location with two duplex fibres (single quad).
Two Repeat48WDM can be used as a point to point pair with 4 fibres in between. It also connects with a Route66 device to offer additional I/O in remote location.
Power Supply
Dimensions 1 RU / 19"
THE SFPs THAT APPEAR IN IMAGE ABOVE ARE NOT INCLUDED
Repeat8-NANO is a compact housing device, capable of up to four 3G-SDI coaxial video inputs or outputs that are converted to/from single-mode optical fibre. Additionally Repeat8-NANO supports MADI signals.
Repeat8-NANO can be equipped with optical transceivers that cover up to 80km quality loss less transmission. Thanks to high selection of optical transceivers this device can be a part of any WDM based system.
The robust chassis provides LEDs indicating input signal presence on each port as well as LEDs for status of the power supplies. The device is equipped with mounting plate which allows for secure and solid attachment.
Repeat8-NANO requires no user configuration or software operation. Repeat8-NANO are fully PLUG-AND-PLAY devices ready to be used once unpacked from the box.
Mux22-IVT/IVT is a device, which combines different formats of video and data in a single duplex fibre cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fibre cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
MADI ports AES10
SANE, LAN ports Convention
Serial Data Port Convention EIA / TIA-485
Auxiliary Fibre Port 1310nm fibre tunnel
Sync Hardware standard BNC- 75Ohm
Remote Control
Mux22-IVT/IC485 is a device, which combines different formats of video, intercom and data in a single duplex fibre cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
Mux22-IVT/IC485 was created in cooperation with RTS. It integrates matrix-panel intercom connections including audio and control data transport.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router - in that case it becomes a remote I/O device for the star-based larger system.
INTERCOM ports 4-wire RTS intercom standard
Sync Hardware standard BNC 75 Ohm
Mux22-IVT/ICAES is a device, which combines different formats of video, intercom and data in a single duplex fibre cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
Mux22-IVT/ICAES was created to interconnect AES-based matrix systems such as Riedel and Clear-Com. It transports AES3 32-bit stream – audio together with control data.
INTERCOM ports AES/EBU
Sync Hardware standard BNC - 75Ohm
Mux22-IVT/MADI is a device, which combines different formats of video, MADI and data in a single duplex fibre cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
Mux22-IVT/MADI provides not only MADI stream transport but offers routing within the Optocore protocol. This means that user can patch any channel between the streams within the system. The device enables also a format conversion - from MADI to analog audio or AES/EBU.
Sync Hardware standard BNC - 75 Ohm
Route66 Fibre Patchbay is perfect solution for studio infrastructure or advanced OB Vans. It is a standalone protocol independent fibre router - can be used to route open as well as proprietary protocols like SMPTE-311m (camera - CCU fibre link), Studer A-Link, Calrec Hydra, Yamaha TwinLANe, Gigabit Ethernet etc. All of those mentioned streams can be freely routed in the Optocore Control software, external hardware or 3rd party software control. Single Route66 can work with multiple different protocols at the same time.
Route66 replaces manual fibre patchbay and necessity to patch cables manually every time the production changes – with Route66 single operator can do all patching from the remote location via LAN.
Route66 Optocore AutoRouter is compatible with Optocore, ProGrid and DiGiCo fibre loops, creating a redundant ‘star’ out of the ring topology.It can be used in the installation and live sound market, where mixed ring/star or star topology is more desirable due to a star based fibre cable layout.
Route66 Optocore AutoRouter automatically discovers mobile devices and adds them to the Optocore loop. When mobile device is disconnected or powered down, Route66 automatically closes the loop with the remaining devices. It always discovers and switches the links automatically to establish redundancy, without any user action – there is no need to control or change fibre patching by user.
Route66 Video AutoRouter is a solution dedicated for small and large studio facilities with multiple connection points and mobile stageboxes.
Multiple Route66 Video AutoRouters are interconnected to create an advance routing array, which is specified and built in close cooperation with the customer. Thanks to this, customer receivers a cost efficient, application engineered solution tailored to his requirements.
Video AutoRouter array enables very quick set changes in studio, without necessity of complex programming each time. Video, audio and data channels always follow the stagebox, whenever it is connected. Thanks to sophisticated design Route66 Video AutoRouter array automatically discovers stagebox movement and patches all pre-programmes channels to the port where stagebox is actually connected. The system enables multiple stagebox connection, each stagebox with its unique patch.On a day-to-day basis no user control is required and all the advanced routing action is done in the background.
Word Clock
