7 Pin Line Male with Locking Ring
Stock Code:
KU-PLS-4207LM
Quantity Breaks
1+
In Stock
Description
7 Pin Line Male with Locking Ring
7 Pin Motor Connector
KU-PLS-4207LM
Description
Kupo PLS-4207 multiple connectors are often applied to combine chain hoist power and control cable as one. It makes a safe, compact and quick setup rigging. Two rugged die cast aluminum alloy half shells in black non-conductive finish for easy cable assembly. Hard gold plated contacts in soldering version and fully compatible with Socapax SL37 family. The extended female ground contacts allow making first / breaking last.
Specification
| Electrical Characteristics | |
| Rated Current/voltage | 6 x 25A + 1 x 50A 250V |
| Operation Limit Voltage (Ac. V. Rms) | 250 |
| Withstanding Voltage (Ac. V. Rms) | 2000 |
| Insulation Resistance (M Ohm Min) At Dc 500V | 2000 |
| Contact Resistance (M Ohm Min) At Dc 1a | 3 |
| Number Of Contacts: 7 Contacts | 6 x 16AWG + 1 x 12AWG |
| PIN-OUT FOR 7PIN MOTOR CONNECTOR: | |
| PINOUT | |
|
1 = L1
2 = L2
3 = L3
4 = MOTOR UP
|
5 = GROUND
6 = MOTOR COMMON
7 = MOTOR DOWN
|
|
- Operating Temperature: -40 + 85deg C
- Hipot Test: 1800 Vac / min
- Terminal Wear: 5000 + Connections
|
|
Important Note:
There is no industry standard wiring for chain hoist using 7pin connector. Since mixing gear from different suppliers is a common practice, you should always double check the equipment and not assume the wiring is correct or has been changed. 7-pin connectors carry power and control together and there is a potential for harming the equipment or the operator if the wiring configuration is not confirmed.
